Jacketed Gear Pump

Product Description

Fluid Tech Systems offer ROTOFLUID  brand gear pump Model FTRN/FTRB/FTRX (Rotary Twin Gear Pump - Molasses Gear Pump - Positive Displacement Gear Pump - External Gear Pump) Which is heavy duty foot mounting type positive displacement rotary twin gear pump. Model TRN/FTRB/FTRX having three piece construction it can be easily cleanable and maintainable. These pumps having a double helical refined gear and hardened grind finished shaft, double helical gear prevent axial load & side thrust which is help to increase life and performance of pump. 

These pumps are having flange at the end of suction and delivery which are available in 1/2" to 6" size. These pumps can be operated up to pressure of 10 kg/cm² with 8.30 LPM to 2083.00 LPM flow capacity.  These pumps are suitable for liquid up to viscosity of 1, 00,000 SSU and maximum temperature up to 200^oC.

Pump Selection

 Model FTRN/FTRB : The self lubricated needle roller bearing type Model FTRN used for clean viscous liquid having sufficient lubricating property such as clean lube oil, Gear oil, Animal oil, Fish oil, Hydraulic oil, Honey, Vegetable oil, SAE lubricating oil for continues duty, However for Intermittent duty Bush Bearing type pump Model FTRB used.

 Model FTRX : This Model independent lubricated needle roller bearing type pump is suitable for handling of Crude oil, Dirty lube oil, HSD, Kerosene, LDO, Paints, Varnish, Wood Pulp, Liquid which have poor lubricant value.

Model FTRBJ : This Model should be selected for liquid which tends to solidify at room temperature such as Bitumen, Furnace oil, Asphalt, Tar, Starch, Molasses, Naptha, RFO, Silicate, Wax, Soap solution. Because This model have jacketing construction facilitate the heating the pump by steam or thermic fluid.

Fluid Tech Systems offers "ROTOFLUID" brand gear pump Model "FTDP" (Bitumen Jacketed Gear Pump , Bitumen Transfer Gear Pump , Jacketed Gear Pump) is a jacketed type foot mounted rotary gear pump. This model are specially designed for Bitumen. Model "FTDP" having S.G.I.N. cast jacketed construction of pump casing and gear & shaft are firmly supported 4 nos. Of self lubricated sintered bronze bush bearing which ensures smooth running. The sealing is done with "GFO" pack PTFE which can sustain high temperature up to 200°C.

This model should be selected for liquid which tend to solidify at room temperature, because it have jacketing construction to facilitate the heating of the pump by steam or thermic fluid. The pumps are available in size (1 1/2" & 2") with thread end connection at suction & delivery. This pump are designed to run at 100 to 500 RPM.